Procedure to reset the limits on the Hormann Series 2/3 ProMatic operator
Info Sheet: ABi020 Please make sure the door is set to operate automatically before resetting (see Manual and Automatic operation info sheet) 1. Turn off the main power supply to the operator at the plug socket. 2. Turn the power back on while holding down the red LED...
How to code a Hormann hand transmitter into a Series 2/3 ProMatic operator
Info Sheet: ABi017 1. Press and release the program button. The Red light will start to flash slowly. 2. With the hand transmitter next to the head unit, Press and hold a button on the hand transmitter (the one which you want to operate the door) until the LED flashes...
Reset a BiSecur hand transmitter – Erasing and resetting all the codes to 128bit mode and replacing batteries
Reset a BiSecur hand transmitter – Erasing and resetting all the codes to 128bit mode and replacing batteries Reset a BiSecur hand transmitter – Erasing and resetting all the codes to 128bit mode and replacing batteries The Hormann HS1 BS, HS4 BS and HS5 BS have a...
Transfering the code to a Hormann HSE 4 BS hand transmitter
Transfering the code to a Hormann HSE 4 BS hand transmitter Info Sheet: ABi011.1 – Transfering the code from an existing HSE 4 BiSecur transmitter to a new BiSecur transmitter Series 3 Hand Transmitters Please note: To transfer the code from one hand transmitter to...